Drag[en]gine Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{tag>graphic skin texture emission tonemapping}}
<WRAP youarehere>
[[:start|Start Page]] >> [[:gamedev|Game Development with the Drag[en]gine]] >> [[gamedev:skinproperties|Skin Texture Properties]] >> [[gamedev:texturepropertylist|Texture Property Database]] >> **emissivity.camera.adapted**
</WRAP>

====== Skin Texture Property: emissivity.camera.adapted ======

Defines if all emissivity based properties are absolute intensities or intensities relative to the camera maximum adapted intensity.

|Excepted Data Source|1 component value|
|Data Range|0 or 1|
|Default Value|0|
|Affected Modules|Graphic|
|Linked Properties|[[gamedev:textureproperties:emissivity.intensity|emissivity.intensity]], [[gamedev:textureproperties:environmentroom_emissivity_intensity|environmentroom.emissivity.intensity]], [[gamedev:textureproperties:outline_emissivity_intensity|outline.emissivity.intensity]], [[gamedev:textureproperties:rim_emissivity_intensity|rim.emissivity.intensity]]|

====== Description ======

The **camera adapted intensity** is updated by the Graphic Module to to choose an appropriate **exposure** for the visible camera content. The camera adapted intensity is adjusted over time to match up with the required intensity. This ensures the rendered content is not under nor over exposed when the lighting conditions change.

By using this texture property you can ensure the intensity of all **emissivity properties** are not too low in strong light conditions nor too high (white-out or even blooming) in low light conditions.

A typical use case for this texture property are **monitors**. With absolute intensities the emissivity is inadequate in extreme light conditions. With this property enabled the emissivity is kept at a **stable, final tone mapped intensity**.

Another typical use case is for **particles** and **beams**. This allows using particle and beam effects in different lighting conditions without becoming too faint nor white-out with excessive bloom.

The property is a **boolean type** property.

A value of 0 equals to all emissivity intensities to be **absolute intensities** in the range from 0 to infinity.

A value of 1 equals to all emissivity intensities to be **relative to the camera adapted intensity**. The values of all emissivity properties are in the range from 0 to infinity and are multiplied by the **camera adapted maximum intensity**. Values in the range from 0 to 1 are recommended (0% to 100% intensity). Values higher than 1 can be used to ensure emissive objects receive white-out and bloom effects.

When using **relative emissivity intensities** keep in mind that graphic modules have to do tone mapping one way or the other. **Tone mapping** in general requires increasing contrast to avoid colors being washed out. This in turn means high intensity values near the maximum intensity for a given scene key tend to wash out towards white (or even blooming). It is thus not recommended to use emissivity intensities above 0.75 if you want to avoid colors to wash out towards white color. In bright light this effect is less pronounced than in low light conditions. By staying under this threshold you should get good results. Of course if you want to ensure emissive materials to white out and bloom starting at an emissivity of 2.0 and above is a good way to ensure this.

Other values are mapped to the closed of these two values.

Usually this property is an single value, either 0 or 1. The default is 0.

====== Examples ======

Skin file used for display content shown in the game world. The display content is read by the player and should stay at a stable intensity no matter if looked at by the player at night time or day time. Without the camera adapted emissivity property the emissivity intensity has to be an absolute intensity.

<code xml>
<?xml version='1.0' encoding='UTF-8'?>
<skin>
   <!-- Texture used to show content set at run-time -->
   <texture name='screen'>
      <!--
      Color used by light sources, a dark grey color close to black. Without emissivity this is rendered.
      -->
      <color property='color' r='0.1' g='0.1' b='0.1'/>
      
      <!--
      Reflectance and roughness. Lower than usual reflectivity to ease viewing content.
      0 roughness produces glass like sharp reflections.
      -->
      <value property='reflectivity'>0.1</value>
      <value property='roughness'>0</value>
      
      <!--
      Screen content shown by emission. Sets renderable to allow content to be set at run-time.
      -->
      <color property='emissivity' renderable='screen'/>
      
      <!--
      The emissivity intensity is set to "0.5". By using relative intensities this represents
      50% intensity compared to the maximum intensity the rendered image is tone mapped to.
      0.5 is a good value keeping colors from washing out while still being well perceptible
      by the player.
      -->
      <value property='emissivity.intensity'>0.5</value>
      <value property='emissivity.camera.adapted'>1</value>
   </texture>
</skin>
</code>

<WRAP center 100%>
<WRAP center box 450px>
{{youtube>INImvJkg8YI?medium}}
<WRAP centeralign>Example usage of **emissivity.camera.adapted** skin texture property.</WRAP>
</WRAP>
</WRAP>
Drag[en]gine Wiki

User Tools

Site Tools

Page Tools
