Table of Contents

,

Start Page » DragonScript Scripting Language » Behavior Elements: Quick and Easy Development » ECBehaviorActorIK

ECBehaviorActorIK

Behavior adding inverse kinematic support to actors.

IK is typically used for situations where actors touch specific points on an object while interacting with them and the exact position or orientation is not well defined. This can be used for example if the actor pulls a lever but the lever can be on different heights above the ground. Using the IK behavior this can be solved without duplicating coding.

To use this behavior add it to the element class after ECBehaviorActorAnimated. By default the behavior is disabled. To use IK enable/disable the behavior from the actor action at the appropriate time. Once enabled the behavior tries to find in ECBehaviorActorAnimated the animator controllers to input the IK parameters. All controllers are optional and will be updated only if present. Assign to the behavior the target position to track. The behavior actively tracks the element each frame update so dynamic targets are possible. The target is defined using an Element instance with optional local matrix and bone name. Bone name is supported if target is castable to BehaviorElement and supports ECBehaviorComponent.

The behavior supports 3 controllers to input IK information to the animator.

The IK Position Controller is used to set position of the target relative to the component assigned to the animator. The position is assigned as vector value.

The IK Rotation Controller is used to set orientation of the target relative to the component assigned to the animator. The orientation is assigned as vector value.

The IK Height Controller is used to set the height of the target above the ground. This is the same value as position.getY() but assigned as single value. This controller allows to fine tune animators to different target heights above ground. To get the best results you usually have to use an animation for reaching at objects in upright and crouched position. Using this controller you can blend between such animations.

Instance Counts

This behavior can be used multiple times on an element. Use the behavior identifier to tell them apart. Multiple instances can be used for example to apply inverse kinematics to different body parts at the same time or to allow switching between different parameter sets (like controller names or ranges) for the same body part.

Element Class Properties

Element class properties have the prefix actorIK. or actorIK(id). if id is not empty.

controllerIKPosition

Name of the controller to assign IK Position to using vector value. If the controller is not found it is ignored.

controllerIKRotation

Name of the controller to assign IK Rotatio to using vector value. If the controller is not found it is ignored.

controllerIKHeight

Name of the controller to assign IK Height to using value. If the controller is not found it is ignored.

Required Behaviors

Optional Behaviors

This behavior does not support optional behaviors.

Persistency

This behavior supports persistency. These parameters are persisted:

API Documentation

ECBehaviorActorIK.

Since DragonScript Module Version 1.2

Use Cases

Element Class Example

pin Dragengine.Scenery

class ObjectElementClass extends BaseActorClass
   public var ECBehaviorActorIK actorIK
   
   public func new() super("ExampleObject")
     // the base actor class creates an actor animated behavior we can use
     
     // create actor ik behavior. assign the controller names used in the animator
     // to  control the inverse kinematics if different than the default.
     actorIK = ECBehaviorActorIK.new(this, getActorAnimated())
     actorIK.getControllerIKPosition().setValue("ik.position")
     actorIK.getControllerIKRotation().setValue("ik.rotation")
     actorIK.getControllerIKHeight().setValue("ik.height")
   end
end

class ActorActionIK extends BAAFirstPerson
   public var ECBehaviorActorIK.Instance actorIK
   
   public func new()
   end
   
   // store the behavior so we can use it
   protected func void initBehaviors()
      super.initBehaviors()
      actorIK = ECBehaviorActorIK.getInstanceIn(actor)
   end
   
   // enable IK while this action is assigned to an actor then disable it again.
   // using disable() instead of setEnabled(false) also clears the target
   public func void activate()
      super.activate()
      actorIK.setTarget(targetElementToTouch)
      actorIK.setEnabled(true)
   end
   
   public func void deactivate()
      actorIK.disable()
      super.deactivate()
   end
end

Example class applying IK to two body groups at the same time if desired.

pin Dragengine.Scenery

class ObjectElementClass extends BaseActorClass
   public var ECBehaviorActorIK actorIKLeft
   public var ECBehaviorActorIK actorIKRight
   
   public func new() super("ExampleObject")
     // the base actor class creates an actor animated behavior we can use
     
     // create actor ik behavior for the left and right hand. assign the controller
     // names used in the animator to  control the inverse kinematics
     actorIKLeft = ECBehaviorActorIK.new(this, getActorAnimated(), "left")
     actorIKLeft.getControllerIKPosition().setValue("ik.left.position")
     actorIKLeft.getControllerIKRotation().setValue("ik.left.rotation")
     actorIKLeft.getControllerIKHeight().setValue("ik.left.height")
     
     actorIKRight = ECBehaviorActorIK.new(this, getActorAnimated(), "right")
     actorIKRight.getControllerIKPosition().setValue("ik.right.position")
     actorIKRight.getControllerIKRotation().setValue("ik.right.rotation")
     actorIKRight.getControllerIKHeight().setValue("ik.right.height")
     
     // using this setup actor actions can enable IK handling for each hand
     // individually or for both at the same time
   end
end

class ActorActionIK extends BAAFirstPerson
   public var ECBehaviorActorIK.Instance actorIKLeft
   public var ECBehaviorActorIK.Instance actorIKRight
   
   public func new()
   end
   
   // store the behavior so we can use it
   protected func void initBehaviors()
      super.initBehaviors()
      actorIKLeft = ECBehaviorActorIK.getInstanceIn(actor, "left")
      actorIKRight = ECBehaviorActorIK.getInstanceIn(actor, "right")
   end
   
   // enable IK while this action is assigned to an actor then disable it again.
   // using disable() instead of setEnabled(false) also clears the target.
   // the element is facing us hence our left side is actually on the right side
   // from the point of view of the element. the target position is always
   // relative to the target element.
   public func void activate()
      super.activate()
      
      actorIKLeft.setTarget(targetElementToTouch, Vector.new(0.2, 0, 0))
      actorIKLeft.setEnabled(true)
      
      actorIKRight.setTarget(targetElementToTouch, Vector.new(-0.2, 0, 0))
      actorIKRight.setEnabled(true)
      
      // you can change target position later on using setTargetMatrix(Vector)
   end
   
   public func void deactivate()
      actorIKLeft.disable()
      actorIKRight.disable()
      super.deactivate()
   end
end