Behavior adding support to actors to make other actors get out of the way.

This behavior is useful for situations where actors can get in the way of the player or other actors. The behavior uses a collider collision test along the movement direction to periodically check for obstacles. If an obstacle is detected and it has ECBehaviorStepAside support it is told to step aside if possible.

This behavior can be used together with ECBehaviorAvoidCollision but the two can potentially affect each other depending on the configuration used for this behavior. Should this happen either adjust the configuration or make sure only one behavior is enabled at each time.

This behavior can be disabled temporarily.

To use this behavior add it to the element class and make sure to call setShapeSphere() to set up the collision test shapes. The best time to do this is either in BehaviorElement.init() or inside BaseActorAction if you need to change them per action.

Configurations

There are usually two possible configurations used for this behavior.

The first configuration applies to short distances only. In this configuration the check interval is around 1s or lower and the clear path time is around 0.05s. This results in the actor clearing the path up ahead of only 0.06m (assuming a walk speed of 1.25 m/s). This configuration results in the actor clearing path only if he is nearly bumping into other actors. The advantage of this configuration is that actors do not move away other actors when approaching them but still moves them away if blocking the path. This configuration works best if you just want to ensure actors can not block the path of other actors without needing them to have a clear path a long distance ahead.

The second configuration applies to long distance clearing of path. In this configuration the check interval is around 1s and the clear path time is around 2s. This results in the actor clearing the path up ahead to 2.5m (assuming a walk speed of 1.25 m/s). In this configuration the actor usually does not get in contact with actors standing in his way. The downside is though actors trying to approach other actors. In this case they are easily made stepping aside which is not always what you want.

For most situations the first configuration is the one to choose since it prevents the actor-actor stuck problems while exhibiting the least side effects. The second configuration though can be insteresting to switch to if actors need a clear path for example while running away. For this reason the first configuration is used as default.

This behavior can be used only once on an element. The behavior always has identifier empty string.

Element class properties have the prefix clearPath..

Determines if the behavior is initially enabled.

• Full name: “clearPath.enabled”
• Type: boolean
• Default Value: true
• Example (*.deeclass)

  <boolean name='clearPath.enabled'>false</boolean>

Check interval in seconds.

• Full name: “clearPath.checkInterval”
• Type: floating point
• Minimum Value: 0
• Default value: 1
• Example (*.deeclass)

  <float name='clearPath.checkInterval'>0.5</float>

Clear path time in seconds indicating how far ahead the actors clear path.

• Full name: “clearPath.clearPathTime”
• Type: floating point
• Minimum Value: 0
• Default value: 0.05
• Example (*.deeclass)

  <float name='clearPath.clearPathTime'>1.5</float>

• ECBehaviorLocomotion

This behavior does not support optional behaviors.

This behavior does support element class to be persistable (setPersistable). Saves enabled, check interval, clear path time and the elapsed check interval time.

ECBehaviorClearPath.

Since DragonScript Module Version 1.4

• Avoid actors blocking the path of other actors. The moving actors can make blocking actors move away.
• Avoid player blocking actors or actors blocking the player.
• Create situations where player or other actors are running and other actors move out of the way ahead of time.

class ExampleElementClass extends BehaviorElementClass
   public var ECBehaviorComponent component
   public var ECBehaviorCollider collider
   public var ECBehaviorColliderAI colliderAI
   public var ECBehaviorLocomotion locomotion
   public var ECBehaviorClearPath clearPath
   
   public func new() super("ExampleElement")
     // create required behaviors
     component = ECBehaviorComponent.new(this)
     collider = ECBehaviorCollider.new(this, component)
     colliderAI = ECBehaviorColliderAI.new(this, collider)
     locomotion = ECBehaviorLocomotion.new(this, colliderAI)
     
     // create clear path behavior. the default settings cause the element
     // to clear path up to a few centimeters ahead.
     clearPath = ECBehaviorClearPath.new(this, locomotion)
   end
end